# Offer a Door Sensor That Integrates Into The Door Frame **URL:** \ **Category:** Wishlist\ **Tags:** smart-lock, door-sensor\ **Created:** [April 19, 2022, 2:47am UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608 "2022-04-19T02:47:28Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![FirbyKirby](https://avatars.discourse-cdn.com/v4/letter/f/5f8ce5/32.png) [@FirbyKirby](https://community.ultraloq.com/u/FirbyKirby)\ **Post date:** [April 19, 2022, 2:47am UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/1 "2022-04-19T02:47:28Z")
The Door Sensor is an essential part of the U-tec Ultraloq which I recently bought. However, I was disappointed to discover that the only option to install the sensor was by mounting it to the exterior of the door frame. Before I selected the Ultraloq U-Bolt Pro, I tried out 2 other major Smart Lock brands (August Pro and August WiFi, and Danalock.) I really appreciated the option on the August Smart Locks to integrate the door sensor directly into the doorframe by drilling a small hole into the interior of the doorframe (see photo below.) Could you offer an accessory like this for the ultraloq so I could remove the unsightly door sensor from the side of my door frame? ![image](https://us1.discourse-cdn.com/flex020/uploads/u_tec/original/1X/e54c4b73ef46eb64338a3b1bb8536814fd9f87ce.jpeg) Image Source: [How to Install: DoorSense™](https://support.august.com/what-is-doorsensetm-Hk4vL1A_z) ---
**Author:** ![Junji](https://avatars.discourse-cdn.com/v4/letter/j/a698b9/32.png) [@Junji](https://community.ultraloq.com/u/Junji)\ **Post date:** [April 21, 2022, 8:27pm UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/2 "2022-04-21T20:27:05Z")
I agree. Ours kept getting removed or fell off, until I screwed them into the door frame. I’ve been contemplating creating a cutout exactly the size of the sensor using a Dremel, and burying the sensor into the frame. If the sensor was smaller or round, it would make such task easier. Have you experimented with replacing the door sensor with an ordinary magnet? I think the door sensor may just be some kind of a magnet. ---
**Author:** ![FirbyKirby](https://avatars.discourse-cdn.com/v4/letter/f/5f8ce5/32.png) [@FirbyKirby](https://community.ultraloq.com/u/FirbyKirby)\ **Post date:** [April 21, 2022, 11:35pm UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/3 "2022-04-21T23:35:47Z")
It’s definitly just a strong magnet. I suspect that any strong magnet would work, but to be sure, we should be cautious due to this FAQ. I’m no expert. [https://support.u-tec.com/hc/en-us/articles/360060207971-Can-I-buy-any-other-brand-door-sensor-](https://support.u-tec.com/hc/en-us/articles/360060207971-Can-I-buy-any-other-brand-door-sensor-) ---
**Author:** ![Frank](https://sea2.discourse-cdn.com/flex020/user_avatar/community.ultraloq.com/frank/32/100_2.png) [@Frank](https://community.ultraloq.com/u/Frank)\ **Post date:** [April 22, 2022, 12:57am UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/4 "2022-04-22T00:57:18Z")
It will leave a permanent hole in the door frame with this integrated door sensor, this is one of the main reasons why we have not chosen this method. We will see more feedbacks on this issue. ---
**Author:** ![FirbyKirby](https://avatars.discourse-cdn.com/v4/letter/f/5f8ce5/32.png) [@FirbyKirby](https://community.ultraloq.com/u/FirbyKirby)\ **Post date:** [April 22, 2022, 1:25am UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/5 "2022-04-22T01:25:08Z")
I agree that this is the tradeoff. I would appreciate minimizing the hole as much as possible. But if a circular sensor could be designed with a small enough diameter (maybe 7 or 8 mm) and a small enough depth (no more then 12 mm) it would not be very hard to fill the hole with wood putty and touch-up the patch with paint. I don’t think most people would notice the repair after it was removed. I’ve done something similar for old wired ADT security system door sensors. ---
**Author:** ![Morrison](https://avatars.discourse-cdn.com/v4/letter/m/779978/32.png) [@Morrison](https://community.ultraloq.com/u/Morrison)\ **Post date:** [April 22, 2022, 7:33pm UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/6 "2022-04-22T19:33:57Z")
Didn’t even occur to me that the sensor could be embedded in the door frame, but I definitely would want that over the current “wart”. Will the existing rectangular sensor work if I embed it into the frame and re-pair it? I currently have it in the upper corner of the door frame (far from the deadbolt contrary to the instructions) and it works well. I’ve had to re-pair it once after about 4 months use when it thought the door was perpetually closed. ---
**Author:** ![Strohl](https://sea2.discourse-cdn.com/flex020/user_avatar/community.ultraloq.com/strohl/32/1105_2.png) [@Strohl](https://community.ultraloq.com/u/Strohl)\ **Post date:** [January 6, 2023, 7:08pm UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/7 "2023-01-06T19:08:21Z")
While yes it will leave a hole in the door, so do screws, and the hole in the side of the door jam is much easier to cover / plug than holes in the frame. A better option was what was used by the old sunnect lock (no longer around) where the magnet is built into the strike lining box and the sensor is built into the end of the deadbolt. [AP501 Manual.pdf (smarthome-products.com)](https://www.smarthome-products.com/productspecs/AP501%20Manual.pdf) But, even if we could simply drill a hole in the side of the door and slide the magnet into it it woudl work. ---
**Author:** ![Muller](https://avatars.discourse-cdn.com/v4/letter/m/958977/32.png) [@Muller](https://community.ultraloq.com/u/Muller)\ **Post date:** [January 20, 2023, 10:17pm UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/8 "2023-01-20T22:17:58Z")
I think it would be easy enough to integrate it into the bolt plate. Lock doesn’t lock until married with the plate. I hated this tick stuck to my door frame, ready to be ripped off, so I dremeled the molding. It works fine. ---
**Author:** ![Eric8](https://avatars.discourse-cdn.com/v4/letter/e/c5a1d2/32.png) [@Eric8](https://community.ultraloq.com/u/Eric8)\ **Post date:** [January 25, 2023, 9:21pm UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/9 "2023-01-25T21:21:28Z")
I agree. The biggest drawback is the sensor. It’s ugly, gets caught on things, just not very sleek at all. ---
**Author:** ![Mike9](https://sea2.discourse-cdn.com/flex020/user_avatar/community.ultraloq.com/mike9/32/1174_2.png) [@Mike9](https://community.ultraloq.com/u/Mike9)\ **Post date:** [February 7, 2023, 5:32pm UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/10 "2023-02-07T17:32:43Z")
Internal option would be nice to have. ---
**Author:** ![Eric8](https://avatars.discourse-cdn.com/v4/letter/e/c5a1d2/32.png) [@Eric8](https://community.ultraloq.com/u/Eric8)\ **Post date:** [February 9, 2023, 12:02am UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/11 "2023-02-09T00:02:28Z")
Just posted a new thread. But had the trim down to the door. I embedded mine under the trim Works great ---
**Author:** ![John26](https://avatars.discourse-cdn.com/v4/letter/j/e79b87/32.png) [@John26](https://community.ultraloq.com/u/John26)\ **Post date:** [July 17, 2023, 1:49am UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/12 "2023-07-17T01:49:29Z")
I agree 100%. The sensor is ugly and will undoubtedly be knocked off. I’d much prefer to embed in door frame. ---
**Author:** ![Dave4](https://avatars.discourse-cdn.com/v4/letter/d/b9e5f3/32.png) [@Dave4](https://community.ultraloq.com/u/Dave4)\ **Post date:** [November 28, 2023, 8:27pm UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/13 "2023-11-28T20:27:19Z")
Can confirm that you can use a different magnet. I just replaced an August lock (sensor in the door frame) with Ubolt Pro wifi + door sensor. Left the August magnet in the frame, set up Ubolt Pro and door sensor per instructions (sans Ubolt magnet). Works great. ---
**Author:** ![mash2k3](https://avatars.discourse-cdn.com/v4/letter/m/aeb1de/32.png) [@mash2k3](https://community.ultraloq.com/u/mash2k3)\ **Post date:** [February 5, 2025, 8:59pm UTC](https://community.ultraloq.com/t/offer-a-door-sensor-that-integrates-into-the-door-frame/608/14 "2025-02-05T20:59:56Z")
I had issues with the door sensor while troubleshooting i found out a regular magnet works better. its slimmer and you can hide it better. on mine it stuck on metal deadbolt strike plate. ![Screenshot From 2025-02-05 15-57-00](https://us1.discourse-cdn.com/flex020/uploads/u_tec/original/2X/7/72b1f9632aeca4e8a388f671fba30bdc15fdb037.png)